Product detail...

  Enlarge  

C5 ULTRA LOW BRACKET & HARNESS MOUNT

Price: $298.00
Product ID C5UL-RHM
Date Added
7/14/2018

THIS PART HAS BEEN DISCONTINUED. IT WAS PRODUCED BY COMBINING OUR ULTRA LOW SEAT MOUNTING BRACKETS AND OUR REAR HARNESS MOUNTING SYSTEM. THE PORTION OF THE REAR HARNESS MOUNT THAT WAS OVERLAPPED BY THE SEAT BRACKETS WAS CUT OFF AND THE TWO PARTS WELDED TOGETHER. WE ARE NO LONGER HAVING THAT SERVICE PERFORMED. CUSTOMERS WERE FINDING EVEN WITH ONLY ONE LAYER OF 3/16" STEEL FOR THE BRACKET THEY STILL COULD NOT REFASTEN THE STOCK NUT SAFELY, ESPECIALLY ON THE DOOR SIDE WHERE THEY NEEDED TO ATTACH THE FOOT FROM THE HARNESS BAR STRUT. MOST CUSTOMERS WERE ENLARGING THE HOLES TO FIT M18 STUD EXTENDERS THROUGH THEM AND INSTALLING THEM IN REVERSE WITH THE HEAD ON TOP, THREADING OVER THE STUDS IN THE FLOOR AND HOLDING THE BRACKETS DOWN.

The floor studs in C5 Corvettes are generally too short to stack multiple brackets and still secure the oem nut in place. This part combines our Ultra Low Seat Mounting Bracket with a Rear Harness Mounting system, welded into one part, keeping the thickness around the rear stud to 3/16". C6's have longer floor studs and can have the two separate brackets overlapping each other. If you have any sensors under the passenger seat that are tall enough to reach the underside of the oem tracks this bracket will not clear them, as it sits lower than the stock rails.

A multi-position bolt-in sub belt bar is also included. There are 8 different sets of holes for various slider width spacing and offsets pre-drilled. Additional holes can be drilled as needed. You will need to adjust the width of the slider release handle as the slider spacing is adjusted.

Continental US shipping- $39

Product Reviews
No Reviews For This Product.