PLEASE NOTE: IF YOU ARE ORDERING 2 SEATS FOR A C5 OR C6 WITH MOUNTING HARDWARE, PLEASE ENTER EACH SEAT INTO YOUR CART SEPARATELY.
Our LOWER BOLSTER ST3 seat was designed to sit as low as possible while still using sliders in C5 and C6 Corvettes. The lower side bolsters make the entry and exit of the seat much easier and
allow OEM belts to come over the top of the bolster. The seat can also be mounted to C5 or C6
OEM power tracks. A subbelt opening is included.
The installation write-ups below are for the original taller ST3 seat, but still provide a basic guide.
An installation write-up of the original taller bolster ST3 in a C6 Corvette can be seen
here.
An installation write-up of the original taller bolster ST3 in a C5 Corvette can be seen here
An install in a S2000 can be seen here
We offer Side Mount Brackets that attach the ST3 seat to the C5/C6 oem tracks but the headroom gain would be minimal compared to our Ultra Low Brackets with Sliders and Side Mounts.
CONTINENTAL US SHIPPING - $139 per seat
We do not arrange shipping outside the continental US. If you would like to order from outside the 48 states we will only accept payment by
Wire Transfer for the product amount and you will need to arrange the shipping.
We will do our best to provide box dimensions and weights in advance so you can get shipping quotes.
If you would like a quote on custom upholstery
for this seat you can contact the shop below. It would be best to text Felix at
203-823-5227 with the seat model and cover specifications you are looking for and arrange a time to call.
https://www.facebook.com/A1upholsteryservices/
https://www.ebay.com/str/falvalle2012
